- Navigation
Results 1 to 7 of 7
Thread: Horn connector thing
-
08-22-2013, 08:05 PM #1
InActive Member
- Status
- Offline
- Join Date
- Jan 2009
- Location
- NC, MT
- Posts
- 1,026
Horn connector thing
When I plugged in the horn connector thing(picture one) the little plastic lip that holds it down in the column broke. I'm wondering what my next move should be, can I just replace the yellow/white thing in picture two?
Last edited by devonsZ28; 08-22-2013 at 08:09 PM.
-
08-22-2013, 08:08 PM #2
InActive Member
- Status
- Offline
- Join Date
- Jan 2009
- Location
- NC, MT
- Posts
- 1,026
-
08-22-2013, 09:33 PM #3
InActive Member
- Status
- Offline
- Join Date
- Jan 2009
- Location
- NC, MT
- Posts
- 1,026
ok figured out the yellow/white things a clock spring, im just gonna replace it, I found one on ebay, I cant find any write ups online, can some tell me how to get this thing out
-
08-22-2013, 09:39 PM #4
InActive Member
- Status
- Offline
- Join Date
- Jan 2012
- Vehicle
- 1997 z28 383 stroker
- Location
- oklahoma city,ok
- Posts
- 2,859
is that a grant wheel? or what
-
08-22-2013, 10:01 PM #5
InActive Member
- Status
- Offline
- Join Date
- Jan 2009
- Location
- NC, MT
- Posts
- 1,026
grant1064
-
08-23-2013, 08:37 AM #6
InActive Member
- Status
- Offline
- Join Date
- Jul 2013
- Posts
- 16
Originally Posted by devonsZ28
the white thing and the yellow thing are two seperate parts. the clock spring will not fix your problem you can buy the white thing at just about any parts store its called a horn contact
horn contact.png
-
08-23-2013, 01:29 PM #7
InActive Member
- Status
- Offline
- Join Date
- Jan 2009
- Location
- NC, MT
- Posts
- 1,026
thanks, once I finally got the pin off and got the clock spring out I realized that, after taking a break from the car and coming back a lot less frustrated, I ended up just heating up a knife and making a new notch for the horn connector, it works good so far, I also learned that grant wheel fits a lot better without the clock spring in
Reply With Quote
Bookmarks