Cam Swap Parts

[gregrob]

Well my little pile of parts for the cam swap is building up.

So far I have the cam from comp, patriot dual gold springs, guideplates should be here this wk, ac delete I'm gonna do at the same time should be here as well.
Still need a GM timing chain, anyone got a link for that?
and a set of Comp Ultra Pro Mag rockers
and all the gaskets.
What about ARP cam bolts, are those a necessity or just a feel good thing? I would imagine reusing the stock ones would't be a problem.
My buddy has a checking pushrod we will use to see what PR's I need.
Gonna reuse the stock lifters as long as they look good.
Can you guys think of anything else? I can't wait to get this put in and screamin

[Counted Out]

Right now I have:
Cam
1.6 Rockers
Crane Double Valve Spring Kit

And I need pretty much exactly what you need:
Timing chain
Gaskets
Ect.

But I THINK you have everything listed. Also, I don't plan on replacing any studs unless I have to.

[Counted Out]

Just remembered, you mite need injectors too depending on how big of a cam. Personally I already bought 12 injectors out of a GXP and I'll pick the best 8. They flow at about 32# with LT1 fuel pressure and can be had pretty cheap.

[gregrob]

I'm at high elevation and it's a pretty small cam duration wise, so I think I'll be good to go. If I max them out though they'll definitely be next on the list.

[gregrob]

Well guys I ordered the rest of the parts tonight. Tell me if I'm missing anything besides incidentals.. (Oil, Coolant, Shop towels, etc).

1605-16 Comp Ultra Pro Magnum Rocker Arms
134-7103 ARP 7/16" Rocker Studs
103 Comp Cam Installation Lube
249-4605 Comp Cam locking plate and bolts
TFS-30400623-8 Trick Flow Hardened Guideplates
FEL-SS72861 Fel-Pro Valve Stem Seals
FEL-MS95580 Fel-Pro Intake Manifold Gasket
FEL-TCS45956 Fel-Pro Timing Cover Gasket Kit
LCT-37421 Loctite 271 High Strength Red thread locking compound
LCT-40463 Loctite RTV Black Gasket Maker Power Can
10128485 Gm Timing Chain
Previously Purchased
Custom XFI Comp Cam
Patriot 8401 BSBC LT1-Specific Dual Gold Valvespring kit
A/C Delete Pulley
LS1 Lid Setup

All this will be going in at the same time. And a N2O Outlet Plate kit will follow shortly thereafter. Had a nos progressive kit I was gonna put on it but sold that tonight and going to just buy the full kit from n20 outlet and most likely a mallory box to use as a window switch and timing retard.

[JAKEJR]

Hub puller and installer if you don't have one.

Jake

West Point ROCKS!