96 to 97+ tail light swap

[devonsZ28]

is there any thing special that has to be done or can you just switch them?

[devonsZ28]

never mind, i found the thread about it

[Flyinz]

To bring up an old thread..

I did this swap, 97-02 tail lights with tail light harness. I found a link to an old cz28 message board, where someone posted, on how to cut a wire off the brake light switch, splice in a new wire and run it back to the light blue wire, in the new tail light harness.

I did this, and now, when I KOEO, the brake lights are stuck on (minus 3rd brake light) but when you hit the brake pedal, the brake lights go out, and the 3rd brake light comes on like its supposed to. I splice the wrong light blue wire, obviously, lol. Does anybody have any advice? Perhaps advise me which, other light blue wire on that switch, that I need to splice in to?? The wire that I DID splice in to, is the most outside light blue wire on the brake light switch, closest to the yellow and green wires. HELP PLEASE!