- Navigation
Results 1 to 5 of 5
Thread: Custom ground cam
-
06-09-2018, 11:30 AM #1
Lurker
- Status
- Offline
- Join Date
- Apr 2009
- Vehicle
- 93 Bird
- Location
- West Wisconsin
- Posts
- 126
Custom ground cam
I can't seem to figure this cam out. It's a custom grind, but I'm not sure what it would be good for. Thoughts?
-
06-09-2018, 01:17 PM #2
Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
That would run good as a medium sized N/A cam or make a halfway decent blower cam too even with the tight 111 LSA. Valve lift with a 1.6 rocker is .5648 I and E. I like the 8* split in duration but would like to have seen some extra lift on the exhaust side.
Originally Posted by Ryan Stout
-
06-17-2018, 08:38 PM #3
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
.
Last edited by zooguy; 06-18-2018 at 11:20 PM.
94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
06-17-2018, 08:49 PM #4
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
lol i think that was my cam for a little while ... i never ran it but when i got it i had it micro polished installed then got a custom cam made and pulled that one out before it was ever started. if its my old one i got it from a guy on here actually @AllBlackLt1
94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
06-21-2018, 07:09 PM #5
Lurker
- Status
- Offline
- Join Date
- Apr 2009
- Vehicle
- 93 Bird
- Location
- West Wisconsin
- Posts
- 126
Interesting.
Reply With Quote
Bookmarks