- Navigation
Results 1 to 5 of 5
Thread: Stock power lumbar seat
-
01-06-2017, 06:48 PM #1
Xtreme Member
- Status
- Offline
- Join Date
- Mar 2015
- Name
- Mike Storm "Stormy"
- Vehicle
- 1995 Trans Am
- Location
- Washington
- Posts
- 1,020
- Blog Entries
- 1
Stock power lumbar seat
Well broke my driver seat today. it now in a somewhat perm recline. Any one know what part of the frame is the weakest? Don't want to pull the whole thing apart to weld it. I'm broke till mid 2018 so... Its going to be a fix not a replace. An I want to upgrade but don't know what a 350 man could sit in that's after market any suggestions? I got a really hard 1st to 2nd today that thru me back in the seat and well I'm propping the seat so's I can drive
1995 Trans Am - CAI - TB coolant bypass - Headers & Performance Muffler - Poly mounts - stock LT1/A4 - 13.3 1/4 - 1.9 60 foot , driven daily.
2008 C6 Corvette LS3 Snake charmer Ram Air intake. 6 Speed Switchable mild to wild exhaust.
2002 Silverado LT Extd Cab Z71 5.3 A4 Composite Bed Stock
-
01-16-2017, 09:42 PM #2
Xtreme Member
- Status
- Offline
- Join Date
- Mar 2015
- Name
- Mike Storm "Stormy"
- Vehicle
- 1995 Trans Am
- Location
- Washington
- Posts
- 1,020
- Blog Entries
- 1
Bump!
1995 Trans Am - CAI - TB coolant bypass - Headers & Performance Muffler - Poly mounts - stock LT1/A4 - 13.3 1/4 - 1.9 60 foot , driven daily.
2008 C6 Corvette LS3 Snake charmer Ram Air intake. 6 Speed Switchable mild to wild exhaust.
2002 Silverado LT Extd Cab Z71 5.3 A4 Composite Bed Stock
-
01-17-2017, 09:59 AM #3
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2008
- Name
- Chris
- Vehicle
- 1994 Trans Am
- Location
- PA, USA
- Posts
- 2,450
You could find a junkyard seat to get you by for now until you can get yours fixed or replaced. 6LE has a popular race seat for our cars but they aren't cheap. I don't know much about fixing these seats, but maybe if you found a good trashed core, you can figure it out. I have two FUBAR 25th anny seats sitting in the weather right now in my backyard. if you were closer, I'd hook you up.
1994 Trans Am Under the knife - but it's alive!!! (5.3 LM7/CPT 60e/QP 9") BUILD THREAD
2009 G8 GXP M6, full exhaust, catch can, cai, stereo
1975 Olds 98 455 burnout machine/panty dropper | 1985 C10 new project
-
01-24-2017, 06:23 PM #4
Xtreme Member
- Status
- Offline
- Join Date
- Mar 2015
- Name
- Mike Storm "Stormy"
- Vehicle
- 1995 Trans Am
- Location
- Washington
- Posts
- 1,020
- Blog Entries
- 1
Thanks I'll check that out. I live up on the North West corner in Washington. Yeah sounds good, would a third gen fit?
Sent from my HP Pro Slate 8 using Tapatalk
1995 Trans Am - CAI - TB coolant bypass - Headers & Performance Muffler - Poly mounts - stock LT1/A4 - 13.3 1/4 - 1.9 60 foot , driven daily.
2008 C6 Corvette LS3 Snake charmer Ram Air intake. 6 Speed Switchable mild to wild exhaust.
2002 Silverado LT Extd Cab Z71 5.3 A4 Composite Bed Stock
-
The Following User Says Thank You to Stormyweather For This Post:
-
01-24-2017, 08:51 PM #5
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2008
- Name
- Chris
- Vehicle
- 1994 Trans Am
- Location
- PA, USA
- Posts
- 2,450
I'm sure you might be able to make one fit. Usually people go the other way and swap 4th gen seats into 3rd gens.
Sent from my LG-H900 using Tapatalk
1994 Trans Am Under the knife - but it's alive!!! (5.3 LM7/CPT 60e/QP 9") BUILD THREAD
2009 G8 GXP M6, full exhaust, catch can, cai, stereo
1975 Olds 98 455 burnout machine/panty dropper | 1985 C10 new project
-
The Following User Says Thank You to harner For This Post:
Reply With Quote
Bookmarks