- Navigation
Results 1 to 7 of 7
Thread: Lt1 to carb setup
-
08-10-2016, 09:30 AM #1
Lurker
- Status
- Offline
- Join Date
- Dec 2012
- Name
- Tommy N.
- Vehicle
- Silver 1996 Camaro Z28, Green 1996 Camaro Z28
- Location
- El Paso, TX
- Posts
- 946
Lt1 to carb setup
Is there a write on doing this or anything I tried doing a search but I couldn't find much. My dad is looking to swap his to carburetor setup and he's wondering and what all needs to be done to the firewall and all to make the distributor
Sent from my iPhone using Tapatalk96 Camaro Z28 Silver Mostly Stock, Full Exhaust
96 Camaro Z28 Green Big Cam, Quick Performance 9 Inch Rear End, Full Exhuast
-
08-10-2016, 10:31 AM #2
Lurker
- Status
- Offline
- Join Date
- Dec 2013
- Location
- SoCal
- Posts
- 250
Doing the carb conversion itself is no problem GMPP makes the intake and Opti delete plate.
This thread has alot of 411 on the swap and what that OP did to the cowel
http://ls1tech.com/forums/lt1-lt4-mo...hat-takes.html96 BBB 383/T56
-
08-10-2016, 04:18 PM #3
Lurker
- Status
- Offline
- Join Date
- Dec 2012
- Name
- Tommy N.
- Vehicle
- Silver 1996 Camaro Z28, Green 1996 Camaro Z28
- Location
- El Paso, TX
- Posts
- 946
Cool deal he saw the opti delete but it says 94-97 his is a 93
Sent from my iPhone using Tapatalk96 Camaro Z28 Silver Mostly Stock, Full Exhaust
96 Camaro Z28 Green Big Cam, Quick Performance 9 Inch Rear End, Full Exhuast
-
08-11-2016, 11:39 AM #4
Lurker
- Status
- Offline
- Join Date
- Dec 2013
- Location
- SoCal
- Posts
- 250
you would need to get a vented opti TC to use the GMMP Opti block off plate. Or just weld up the 93 TC and use a Gen 1 SBC timing pointer
96 BBB 383/T56
-
08-11-2016, 02:59 PM #5
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2008
- Name
- Chris
- Vehicle
- 1994 Trans Am
- Location
- PA, USA
- Posts
- 2,450
I think @zooguy is also working on this swap.
1994 Trans Am Under the knife - but it's alive!!! (5.3 LM7/CPT 60e/QP 9") BUILD THREAD
2009 G8 GXP M6, full exhaust, catch can, cai, stereo
1975 Olds 98 455 burnout machine/panty dropper | 1985 C10 new project
-
08-11-2016, 03:37 PM #6
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
I changed the bolt pattern on my heads ... yes welded the intake manifold bolt holes shut on the heads ... then redrilled and tapped bolt holes with a SBC pattern.
i am running a wiend team g intake manifold ... yes the GMPP is a easy bolt on choice but i needed a single plane intake for my setup ...
Sent from my SM-N910T using TapatalkLast edited by zooguy; 08-11-2016 at 04:58 PM.
94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
10-07-2016, 10:45 AM #7
Lurker
- Status
- Offline
- Join Date
- Dec 2012
- Name
- Tommy N.
- Vehicle
- Silver 1996 Camaro Z28, Green 1996 Camaro Z28
- Location
- El Paso, TX
- Posts
- 946
Was wondering since we have almost everything now to covert the car what type of hoods, air cleaner set ups are you guys running with the carb swap? I was thinking of trying to convince him to do like a cowl plexiglass cleaner set up but I'm not sure what his plan is
96 Camaro Z28 Silver Mostly Stock, Full Exhaust
96 Camaro Z28 Green Big Cam, Quick Performance 9 Inch Rear End, Full Exhuast
Reply With Quote
Bookmarks