- Navigation
Results 1 to 7 of 7
-
09-27-2016, 09:08 PM #1
LTX Master
- Status
- Offline
- Join Date
- Sep 2008
- Vehicle
- 1994 Chevy Camaro z28
- Location
- IL
- Posts
- 914
Those WITH front swaybars, inside..
Those with front swaybars, could you post a pic of it installed? I'd like to install my new BMR hollow bar', but Im not sure what I'm missing, on the car itself. I can't tell, where on the car, the swaybar bushings, are to be mounted? Any help would be great!!
94' Z -383 LTx, AI TFS 215cc heads/C/I
S60 rear
Stepped Hedman Hustlers an a Monoblade TB
-
09-27-2016, 10:44 PM #2
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,326
See if Shoebox's factory manual cut helps. At least the bracket details are shown on one side. As I recall the other side bracket (not) shown also bolts to the subframe, but it's a bit more complicated.
http://shbox.com/1/front_suspension.jpgSOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
09-27-2016, 10:52 PM #3
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,326
And this photo of passenger side
http://www.camaroz28.com/forums/memb...ght-bank-6227/
This one isn't real clear.
http://www.camaroz28.com/forums/memb...0&ref=gnr-nextLast edited by Injuneer; 09-27-2016 at 10:54 PM.
SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
09-28-2016, 08:26 AM #4
LTX Master
- Status
- Offline
- Join Date
- Sep 2008
- Vehicle
- 1994 Chevy Camaro z28
- Location
- IL
- Posts
- 914
Yep, that did it. The bracket, that the swaybar bushing bolts to, is what I need. I haven't had a front bar' on the vehicle for years, so I must have pitched that bracket years ago, when I was removing weight. Thank Fred!
94' Z -383 LTx, AI TFS 215cc heads/C/I
S60 rear
Stepped Hedman Hustlers an a Monoblade TB
-
09-28-2016, 10:33 AM #5
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,326
I removed my front bar many years ago. I should still have the brackets in the parts pile in my garage attic if you can't find any. I think the cruise control actuator box may somehow be connected to a part of the driver side bracket, or interfere with it, but you have probably deleted cruise. Mine is gone too.
SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
09-28-2016, 10:38 AM #6
LTX Master
- Status
- Offline
- Join Date
- Sep 2008
- Vehicle
- 1994 Chevy Camaro z28
- Location
- IL
- Posts
- 914
Ok, I'll look tonight in my parts box. If I can't find them, I'll let ya know and pay ya for them.
94' Z -383 LTx, AI TFS 215cc heads/C/I
S60 rear
Stepped Hedman Hustlers an a Monoblade TB
-
09-28-2016, 06:37 PM #7
Lurker
- Status
- Offline
- Join Date
- Mar 2009
- Location
- Spring, TX
- Posts
- 950
Not a great picture, but here's my Strano bar installed.
IMG_2636.jpg1997 Pontiac Trans Am WS6 clone | Build Thread | - just needs paint!
2001 Chevy Silverado 2500HD (the DD)
Reply With Quote
Bookmarks