94 Z brake problem

[Injuneer]

The factory manual indicates (procedure for manual bleed, not pressure bleed):

1) bleed ABS unit (2 bleeders) - start with rearward bleeder, then forward bleeder

2) bleed right rear, left rear, right front, left front in sequence

3) return to ABS unit and re-bleed

4) turn key to "run", check for brake travel and firm pedal. If OK start engine and recheck for pedal travel and firmness. If OK, skip to step 6

5) if pedal is soft home ABS motors with Tech 1, or use manual procedure (let me know if you need it)

6) road test

Moderator may want to move this to "Suspension and Brakes".