Nitrous Nozzle Pics Wanted

[LT1BADZ]

Anyone have pics of clean, single nozzle kit installs? Just picked up a Nitrous Outlet X-series single nozzle kit with purge.

Thanks

[LT1BADZ]

http://www.nitrousoutlet.com/nitrous...93-97-lt1.html

I'm considering this mount, will it work with the side inlet/outlet solenoids?

[LT1BADZ]

Everyone must be using a plate?

[devildog1]

I had my setup done using an aluminum elbow and having it drilled on the outside of the 90 degree bend and mounted so it was a direct spray into the TB right in the center. Worked great. The spot where it was drilled had to be built up some by aluminum welding and then drilled and tapped so it would mount straight in.

[zoomo]

thats basically what im doing. with a trickflow intake elbow. i have the nozzle in the side. right near the iat sensor. though it would be nice if it was more centered. i made my mount with some flat metal from the local hardware. just cut it and bent it and mounted the solenoids to it, then to the injector rail bolts. I need to make it all better but it works for now. will take some pics tomorrow

[zooguy]

20140322_185448.jpg

20140322_185458.jpg

budget build problems