SBC 1 5/8 long tubes

[SavageZ28]

Hello so I just picked up a pair of sbc long tube 1 5/8 headers for $80 and I was so wonder I g what the gains usually are for 1 5/8? And will these work with the lt1 heads? They guy said they are off a sbc. The specs are 1 5/8 primaries with 3" collectors. And I am not sure they are long tubes since ive never seen a pair in person or are the mid lengths? For some reason the image isn't uploading -_-

[SavageZ28]

https://medford.craigslist.org/pts/5220632461.html

[SavageZ28]

[stormy69]

those wont work in an 4th gen lt1 fbody...

[SavageZ28]

@stormy69 that's what I get to figure out tomorrow lol I figured they where cheap enough where I could just sell them if they didn't work

[Dan]

Those are probably going to hit the ground lol


Sent from my Galaxy S6.

[stormy69]

they wont hit the ground, they wont fit well enough to bolt to the heads so they can lol

[SavageZ28]

At this rate of trying to find some used fbody headers I'll make these Bastards fit lmao @stormy69

[Dan]

If they hang too low you can always cut and reweld

Sent from my Galaxy S6.

[SavageZ28]

Yeah that's what I'll probably do. A lot of people have made sbc headers work for these cars so I'll give it a shot. Hell otherwise I'll sell them for $100 and make $20 @DanDalessandro