Headroom in caged camaro

**cavamaroZ28** · 09-18-2015, 07:57 PM

Anyone have horrable headroom? Iv got about maybe 2 inches between my head and bar on the side and maybe 5 in the front. I cant adjust the seat anymore or else i cant touch the pedals or even be somewhat comfortable. Its tucked as close as i could get it to the center console also.uploadfromtaptalk1442624070730.jpg uploadfromtaptalk1442624082921.jpg uploadfromtaptalk1442624116521.jpg

Sent from my SM-G900P using Tapatalk

**shownomercy** · 09-18-2015, 07:59 PM

Drop down the seat on custom brackets, a strict tech inspector should by all means fail that.

**cavamaroZ28** · 09-18-2015, 08:24 PM

I dont wana go lower than the factory height cus its a pain to see as is and now its got a big sunoco hood. Im gona throw the stock seat in and take some measurements.

Sent from my SM-G900P using Tapatalk

**waltsfastz** · 09-18-2015, 08:24 PM

Originally Posted by shownomercy

Drop down the seat on custom brackets, a strict tech inspector should by all means fail that.

you talking about lower to the floor? Im in no way doubting you, Im just curious.(as far as tech)
I have mine sitting almost on the floor and kisked back to where the top of my seat is in line with the edge of the hoop. Im 6'3 and it isn't that bad. I have the narrow Kirkeys and they aren't that comfortable. However buy some SFI approved padding. It does loose some room but it may save a headache.

**shownomercy** · 09-18-2015, 08:43 PM

Ya sorry, I messed up on max/min requirement. Disregard my ramblings.

"All roll bars must be within six inches of the rear, or side, of the driver’s head, extend in height at least three inches above the driver’s helmet with driver in normal driving position or be within one inch of the roof/headliner in the area above the driver’s helmet, and be at least as wide as the driver’s shoulders or within one inch of the driver’s door.”

Confusing as hell the way they wrote that.

**cavamaroZ28** · 09-18-2015, 08:47 PM

Oh yea padding is a must. Wana know what i think has alot to do with this.... the way my car is sitting with no motor or trans... the nose is pointed up so thats gota be throwing me off mounting the seat. Cus im making it comfortable for me when the car is at the wrong angle.

Sent from my SM-G900P using Tapatalk