- Navigation
Results 1 to 10 of 10
Thread: 80e Vent tube breather tank
-
09-08-2015, 08:26 AM #1
Xtreme Member
- Status
- Offline
- Join Date
- Jan 2012
- Posts
- 5,654
80e Vent tube breather tank
Thinking of running a 4an line from vent tube to puke tank on firewall, thoughts?
Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
09-08-2015, 09:25 AM #2
Administrator
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,464
Supporting Member
@Cahall
Sent from my SAMSUNG-SM-G900A using Tapatalk1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
1994 Camaro Vert - SBE LE1 Summit 8802 Cam - The Cruiser
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E/Holley Terminator EFI
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
09-08-2015, 10:07 AM #3
VIP Member
- Status
- Offline
- Join Date
- Mar 2009
- Location
- IN
- Posts
- 2,818
It's an 80e tho....
-
09-08-2015, 11:09 AM #4
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Real men run glides and 400s!
-
09-08-2015, 05:07 PM #5
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Why is it belching trans fluid?
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
09-08-2015, 05:16 PM #6
Xtreme Member
- Status
- Offline
- Join Date
- Jan 2012
- Posts
- 5,654
My guess is it was too full before TS, got hot as hell, puked itself low, then started to aerate and spew more out the vent.
Originally Posted by firebird_1995
I want to have some safety net from when it is hot and I am pushing it hard. Obviously I will get the level fixed but cleaning the underside of my car gets old.Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
09-08-2015, 07:09 PM #7
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Oh ok. I would be worried about having too much restriction on the vent line. Could blow out seals. Maybe you could plumb it in a way that would still allow it to vent should the catch can not receive excess oil fast enough.
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
09-09-2015, 08:43 AM #8
"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
They have catch cans with breathers on them if thats what u mean. Originally Posted by firebird_1995
LTXtech.com IS my drug...
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
09-09-2015, 08:56 AM #9
Xtreme Member
- Status
- Offline
- Join Date
- Jan 2012
- Posts
- 5,654
I believe he is implying the pressure head created by a few feet of hose on the breather may be detrimental
Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
The Following User Says Thank You to shownomercy For This Post:
-
09-09-2015, 05:21 PM #10
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Maybe? I'm not sure at what rate it's puking. I guess a -8 hose would ensure it moves freely into the catch can without much resistance on the vent line. Originally Posted by shownomercy
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
Reply With Quote
Bookmarks