- Navigation
Results 1 to 3 of 3
-
04-22-2015, 08:41 PM #1
InActive Member
- Status
- Offline
- Join Date
- Dec 2014
- Name
- BB
- Vehicle
- 1995 Camaro Z28
- Location
- Nashville, TN
- Posts
- 12
MAF connection
Anyone know where I can order a new 3 pin MAF connector from. Finally tracked down the reason why I was getting codes about my MAF. A loose wire..... Here's a pic.
20150422_191236.jpg95 Z28/ Shift kit and Dynomax exhaust. Been in storage for 13 years. Finally stretching her legs again. New mods on the way.
-
04-22-2015, 08:49 PM #2
Lurker
- Status
- Offline
- Join Date
- Sep 2014
- Name
- Joel
- Vehicle
- 1996 camaro Police interceptor
- Location
- Colorado
- Posts
- 1,158
I had the same problem with my 96 Camaro a couple of years ago. I went down to my local GM dealer and they replaced the connector. There is a special tool that they can remove your old connector with a new one. The connector looks just like it did from the factory. ( no soldier or button connectors.
-
The Following User Says Thank You to Camaro96 For This Post:
-
04-22-2015, 08:58 PM #3
Xtreme Member
- Status
- Offline
- Join Date
- Apr 2012
- Name
- Cameron
- Vehicle
- 1994 Formula
- Location
- Dover, De
- Posts
- 2,076
Steal a hair pin from your significant other, straighten is out and put a slight bend at the end. Pops those connectors every time perfectly. Solder everything back together and heat shrink.
This kind. If it has a coating; shave it off with a utility blade.
2012 Sierra - 5.3, Summit "Stage 1" Truck Cam
1994 Jimmy - LS? LT? 4wd? AWD? Time? Money?
1994 Formula - 5.3, Terminator X, Billet VS7875, "Best Cam", T56, QP 9"
Formula Build Thread
-
The Following User Says Thank You to Sahara54 For This Post:
Reply With Quote
Bookmarks