- Navigation
Results 1 to 4 of 4
-
11-13-2014, 02:07 PM #1
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Need advice on nozzel location for a fogger
Like the title says. Im getting ready to chuck the intake up in the mill and start drilling/tapping holes for fogger jets. Assuming they need to go in at 90 degrees from the runner how far down can you go before running into clearance issues withthe valve cover? Any pics are much appreciated
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
11-13-2014, 03:38 PM #2
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Stock lt1 intake?
-
11-13-2014, 03:41 PM #3
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
http://blog.nitrousoutlet.com/ltx-in...-port-systems/
Mines the one on the top with distribution blocks. ...
They welded bungs on for clearance. ..
Other ones are just drilled and tapped with rails from what It looks like..
Hope this can give you some ideas
-
11-16-2014, 09:54 AM #4
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Thanks, That will work. Yes it is a stock intake
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
Reply With Quote
Bookmarks