tailpipe cutter...

**blkchevyz** · 10-10-2014, 09:14 AM

anyone ever use a tailpipe cutter? index.jpg

i need to cut a section of my exhaust out of my daily driver to install a resonator/glasspack to tone it down a little.

dont think there is enough room to get a reciprocating saw up there... plus this will probably do a cleaner straighter cut...

hate to go out and buy one if they dont work worth a shit.

***popo8*** · 10-10-2014, 09:40 AM

Used em all the time when I was hangin at the garage... use a can of pb blaster in conjunction for lubrication.

**blkchevyz** · 10-10-2014, 10:02 AM

good to know. i have a habit of making shit more difficult then it needs to be... didnt want this to be one of those cases lol

**95 blackbird** · 10-10-2014, 10:05 AM

Check with autozone or advance. They MIGHT rent them. I could be wrong tho. That is what i plan on using on my Y when i throw a cat in there to get it thru inspection next summer.

***popo8*** · 10-10-2014, 10:22 AM

Originally Posted by blkchevyz

good to know. i have a habit of making shit more difficult then it needs to be... didnt want this to be one of those cases lol

Def a nice piece... no worries man.

***SSlowBoat*** · 10-10-2014, 12:18 PM

sawzall lol

**blkchevyz** · 10-10-2014, 01:46 PM

Originally Posted by TubbyFormy

sawzall lol

yeah i have one of those but to use it i'd probably have to drop the exhaust... i used it when i cut a section out to put a cat in on the same car... its a gp gxp so the exhaust is a little tunnel.

**GreenZ96** · 10-11-2014, 09:49 PM

We use those to cut steel gas line. Use a hose clamp as a guide to help keep your cut straight. Those cutters like to walk the first few spins until you get a groove started

**blkchevyz** · 10-14-2014, 09:33 AM

Originally Posted by GreenZ96

We use those to cut steel gas line. Use a hose clamp as a guide to help keep your cut straight. Those cutters like to walk the first few spins until you get a groove started

thanks for the tip.