- Navigation
Results 1 to 5 of 5
Thread: computer id question
-
06-01-2014, 06:42 PM #1
InActive Member
- Status
- Offline
- Join Date
- Feb 2014
- Name
- trey
- Vehicle
- 94/97 camaro z28
- Posts
- 4
computer id question
Guys and gals I bought a Camaro roller and the guy I bought I from threw in two computers with it. What I need to know is how to identify these computers I know that one is from a 1995 and the other is from a 1996 so what I need to know is how to tell if they are obd1 or 2 and id love to know what transmissions they are for. I would think they are for a stick car beings the car itself was stick, but I'd like to know for sure. So any more info in id ing these would be great. Thanks in advanced.-Trey
-
06-01-2014, 06:51 PM #2
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,326
All 95's are OBD-1 and can be programmed to control a 95 PWM 4L60E or a 94-97 T56. All 96's are OBD-2 and can be programmed to operate a 96/97 PWM 4L60E or a 94-97 T56. You can only tell what trans they are programmed for by pulling the program. A 96 PCM can be converted to OBD-1.
SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
06-01-2014, 07:02 PM #3
InActive Member
- Status
- Offline
- Join Date
- Feb 2014
- Name
- trey
- Vehicle
- 94/97 camaro z28
- Posts
- 4
ok well the 95 has a full harness. if I advertise to sell these what should I say about transmission or should I say unknown or actually yah I know lots of ors can they be tuned to go stick or auto? thanks by they way-Trey
-
06-01-2014, 07:17 PM #4
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,326
The PCM can be programmed for automaric or manual. There is only one PCM part # used for a 95 LT1.
SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
06-03-2014, 08:09 PM #5
LTXTech Sponsor
- Status
- Offline
- Join Date
- Sep 2009
- Posts
- 770
Look at the service # if it ends in 88051 that's OBDI
Reply With Quote
Bookmarks