Strange S60, 3.73, spool, chromoly driveshaft, th400 w/ brake, rmvb yank 3600 stall,

[firebird_1995]

Putting this out as a feeler for my dad. He was wanting to get serious with his car and start spraying so I talked him out of his 6 speed and perfectly good 3.73 LS rear end and into this setup. I will look up exact details tomorrow (later today) but he's got a low mileage strange s60 unit with the spool (have to see if its the lightweight one). He hates driving it on the street and that's why he wants rid of it. Had a problem with shearing the strange brand studs off so he upgraded to 1/2 ARP studs. They are long enough to be nhra legal in a shanked lug nut. Complete from rotor to rotor. The driveshaft is chromoly, has 1350 u joints and is custom length for the th400. The th400 has been built by a shop in southern Missouri (I don't have the paperwork for it but everything is still in the car and works great. Prospective buyers are welcome to come joyride to test it out. It has a tci scattershield, yank 3600 stall, reverse pattern manual valve body, and a trans brake. The trans builder told us something about having some sort of neutral safety modification done to it but I can't recall for sure or what it even meant at the time. (Let me know if that rings a bell anyone). It does have a BMR conversion crossmember that comes with it but was for a t56 application so its been modified for the th400 (nothing wrong with it. Just a full disclosure.) Also comes with a B&M Pro Stick shifter with the factory ball and the t grip with the button on the side as well as the shift cable. He's not planning on doing any racing and I'm pretty sure its got an sfi flexplate in it so it will be included too. As you can tell he has a lot of money tied up in this setup and it won't do much good to sell one piece so its pretty much going to have to be all or none unless there's enough collective interest in a few people to warrant splitting it up. We will cross that when we get there. He has well over 4k in the setup and since it was me that talked him into the stuff to begin with, I'm not going to let him take less than $3500 for it.

There may be a tnw plate kit listed tomorrow too

[firebird_1995]

bump. willing to bust this up if I can get enough interest in the big pieces.