smog delete??

[beaver50]

I took the smog control pump off my car.How do i get rid of the EGR valves on both sides?

[Chris]

There are egr delete plates you purchase that go in place of the vavke and lines

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[Chris]

http://www.ebay.com/bhp/lt1-egr-block-off-plates

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[Injuneer]

Do you think he may possibly mean the AIR check valves sitting on top of each exhaust manifold? If that's what you mean, unscrew the fittings from the manifold, and use M22-1.5 oil drain plugs, with copper gasket, to block the holes in the manifold. M22 only works on 93-95. Dual-cat manifolds are closer to 18mm.

http://www.cgenterprises.com/drain_plugs_metric.htm

[Chris]

Good call!

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[beaver50]

Do you think he may possibly mean the AIR check valves sitting on top of each exhaust manifold? If that's what you mean, unscrew the fittings from the manifold, and use M22-1.5 oil drain plugs, with copper gasket, to block the holes in the manifold. M22 only works on 93-95. Dual-cat manifolds are closer to 18mm.

http://www.cgenterprises.com/drain_plugs_metric.htm

Thats it,Dont they screw into the EGR valves or not?But that what im after.Thanks for the help/

[Injuneer]

Courtesy of Shoebox

EGR valve:

http://shbox.com/1/egr1.jpg

AIR check valves:

http://shbox.com/1/diverters.jpg

94 F-Body and up the AIR and EGR are two totally different and separate systems. 93 uses some common plumbing, but that's only because the systems never operate at the same time.

Here is an M22 drain plug in the AIR connection on a header.

[beaver50]

The air check valve M22 plug is the way I went.

Thanks