Become a ltxtech.com member, Click here to register!

Results 1 to 8 of 8
  1. #1
    LTX Regular


    Status
    Offline
    Join Date
    May 2012
    Name
    Daisuke
    Vehicle
    1996 Z28 SS
    Location
    Torrance, CA
    Posts
    230

    Default Finally found a T-56 Parts Car!

    I have been in the process of a performance ground-up rebuild of my 93 Camaro and finally located a donor T-56 Camaro for my tranny swap. It has been significantly more difficult to locate parts in Hawaii than it would be on the mainland so I am pretty happy.

    The car is a bone stock 94 z28 that was rear-ended pretty badly. The car can still move but the rear fender wells rub pretty harshly on both tires when going forward so it can't drive well. Also the hood was crunched so I can't exactly see where I am going.

    Lucky for me the engine and transmission are in great shape with only 65k miles on them. I bought it off some guy on craigslist that resells cars he buys at auction. Luckily he had his own flatbed truck to haul the car over here with. I got it for $2500 delivered so I think I got a pretty good deal considering I cant find a decent used T-56 setup for less than 1600 plus the cost of shipping it here.





    The plastic is because there is a huge gap between the rear hatch and the rest of the rear end from the accident. We get some nasty rainfall here in Hawaii.



    Looks like the car was rear-ended pretty hard and then ran into the car in front of it from the force of impact. Only damage in the engine compartment is to top of the radiator support. All engine components and accessories are working fine.



    The owner had the foresight to use seat covers. No ripped driver side seat!



    Other than a little dirt, the front and rear seats are in amazing condition. Only downside is that it has tan cloth interior.





    No rips or significant wear on anything on the interior. Really quite amazing after seeing so many of these cars in terrible condition. Even the center console cover hinge is intact! Feels like it will break after some repeated use though



    The reason why this is a donor car




    I will be pulling the engine/trans this coming week to get my tranny swap parts and I will be parting out everything but the interior over the coming month. Let me know what you guys think.
    1996 Z28 SS M6 Polo Green Metallic - Built 355 from my 93
    1996 Z28 SS M6 Arctic White - Stock
    1993 Z28 Medium Patriot Red - 355 LT1 with M6 and 24x Conversion (RIP in peace)
    2007 Corvette Z06 Black - Stock

  2. #2
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    wow.... i think the center console lid in tact....is worth the money. lol


    Larry (Popo8) Co-owner
    LTXtech.com


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  3. The Following User Says Thank You to popo8 For This Post:


  4. #3
    Banned


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Big Papi
    Vehicle
    2015 Fusion Titanium AWD
    Location
    Moscow Mills Mo
    Posts
    7,241
    Blog Entries
    1

    Default

    I can only imagine how hard it is to get parts out there!. Ps I want to steals your interior

    Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

  5. The Following User Says Thank You to Chris For This Post:


  6. #4
    Lurker


    Status
    Offline
    Join Date
    Feb 2009
    Location
    Edwardsville, IL
    Posts
    209

    Default

    Nice find. You should make up a build thread for your 93, I'm sure everyone would love to follow along.
    Josh 1994 Z28
    M6 Converted - Intake - Exhaust

  7. The Following User Says Thank You to SchaefZ28 For This Post:


  8. #5
    Xtreme Member


    Status
    Offline
    Join Date
    Jan 2010
    Location
    Louisville, Ky
    Posts
    1,483

    Default

    Yes not bad at all considering your location. Plus whenever you finish you still have $400 in scrap
    Bryan
    1994 B4C "Special Service" Camaro - Stock LT1 - 6 speed - 46k miles - Madz28 Tune - 307/340 sae
    LT4 Clutch - Delteq Ignition - K&N CAI - Pacesetter LT Headers - Magnaflow Exhaust - Unbalanced Engineering/Koni Suspension
    LS1 Brakes/Drive Shaft - T2R Diff - 373's - much more...

  9. The Following User Says Thank You to BLK95-Z For This Post:


  10. #6
    LTX Regular


    Status
    Offline
    Join Date
    May 2012
    Name
    Daisuke
    Vehicle
    1996 Z28 SS
    Location
    Torrance, CA
    Posts
    230

    Default

    I have been wanting to do a build thread but it is just so tedious to document everything. I guess from the point I am at now it won't be too bad. I will start the build thread today I suppose.

    I'm hoping that once I pull the parts I need I can still get a few hundred for the rest of the stuff before I junk the car. There is so much work to be done though that it feels a little overwhelming.
    1996 Z28 SS M6 Polo Green Metallic - Built 355 from my 93
    1996 Z28 SS M6 Arctic White - Stock
    1993 Z28 Medium Patriot Red - 355 LT1 with M6 and 24x Conversion (RIP in peace)
    2007 Corvette Z06 Black - Stock

  11. #7
    Lurker


    Status
    Offline
    Join Date
    Feb 2009
    Location
    Edwardsville, IL
    Posts
    209

    Default

    Quote Originally Posted by Homerandabe69 View Post
    I have been wanting to do a build thread but it is just so tedious to document everything. I guess from the point I am at now it won't be too bad. I will start the build thread today I suppose.
    The hardest part is just remembering to take pictures as you go along lol
    Josh 1994 Z28
    M6 Converted - Intake - Exhaust

  12. #8
    LTX Regular


    Status
    Offline
    Join Date
    May 2012
    Name
    Daisuke
    Vehicle
    1996 Z28 SS
    Location
    Torrance, CA
    Posts
    230

    Default

    I just brought my phone along with me now so I will be taking pictures as often as I can remember.

    Build Thread
    1996 Z28 SS M6 Polo Green Metallic - Built 355 from my 93
    1996 Z28 SS M6 Arctic White - Stock
    1993 Z28 Medium Patriot Red - 355 LT1 with M6 and 24x Conversion (RIP in peace)
    2007 Corvette Z06 Black - Stock

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •