- Navigation
Results 1 to 4 of 4
Thread: Cnc plasma cutting
-
11-14-2012, 10:40 PM #1
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Cnc plasma cutting
I've got my brackets for my m122 build ready for the next phase of fabrication. I've got a shop that can do what I need but they are a month out on projects and I thought I would see if anyone on here does this stuff on the side. They will be cnc plasma cut from 1/4" steel. I will weld them together and after I work out any fitment issues we will move on to aluminum. I could (and might) end up just free hand cutting them with a plasma cutter but I figured if I was going to move on to aluminum later anyways, having the measurements on hand will save time in the long run. Cheaper to learn on steel.... anyone interested?
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
11-14-2012, 11:00 PM #2
"Project Storm Trooper"
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Tony
- Vehicle
- 93 StormTrooper Z28
- Location
- Rapid City, SD
- Posts
- 4,810
dam, i use to have access to a FlowJet...<----bad ass piece of equipment!
Official Member of $30k Club - Work in progress1993 Z28- 24x EFI, Clayton Racing 383ci, F1a w/FMIC, AFR 210's, LE Custom cam, LE LT4 Intake/heads, 80# injectors, 255lph/340lph pumps, T56 Conversion, 9" 4.11 w/spool, LPP LT w/Borla, Full UMI suspension....
1987 Iroc-Z - Stock Summer DD
-
11-15-2012, 12:26 AM #3
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
I looked into buying one. They can be had for $2600. Didn't realize they were that inexpensive. I'm actually considering it......
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
11-15-2012, 06:13 PM #4
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
The cnc plasma cutter, not the flowjet btw
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
Reply With Quote
Bookmarks