- Navigation
Results 1 to 6 of 6
Thread: Tach is way off
-
08-08-2012, 11:57 PM #1
Tach is way off
24x swap, all efi connection stuff, all fuses unplugged minus ecu, crank, and gauges, value in HPT is 3, grounds all good and checked with a meter, has a MSD 2step set at 4k. Now that that's out of the way...
When starting the car the tach reads 2500-3500rpm. As soon as it runs it goes to 900 like it should. Driving it's fine, it spins hard in 1st at the track. It shoots to 11500rpm, but HPT says I'm at 5500. ONLY happens when car spins and when starting. Any ideas?
-
08-08-2012, 11:58 PM #2
http://www.youtube.com/watch?v=OMzHf...e_gdata_player
This should work, posting from my iPhone.
Tried did connecting the 2step, nothing. Should I try the ecu from my truck?Last edited by Ryan Stout; 08-09-2012 at 02:46 AM.
-
08-09-2012, 08:03 AM #3The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
never seen that one before?
94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
08-09-2012, 09:14 AM #4Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
-
08-09-2012, 02:41 PM #5
Already tried it Sean. Was at 6 on high/ low, I put it on 3 unless I missed something. Anybody hear of doing a pull up resistor?
-
08-09-2012, 04:04 PM #6
Wondering if I got a bad ecu even though its rare.
Bookmarks