- Navigation
Results 21 to 28 of 28
Thread: 1993 Z28 T56-where to start
-
07-24-2012, 06:41 PM #21
That's it lol. Doesn't it have reverse to the left and down or something like that? I remember its different from a t56. Also could that tranny be used in a fbody?
Prev: 94 Formula V8 M6 - R.I.P. / 96 Trans Am WS6 M6 - Sold / 00 Firebird 3.8 M5 - Sold
Current: 94 Camaro Z28 A4
Jesse
-
07-24-2012, 06:49 PM #22
I just took off a set of stock injectors from my car, ill let them go CHEAP if you want em.. like $30 shipped..
Also if theres one word of advice i can give,Its BUILD THE CAR FROM THE BACK FORWARD. Start with the rear end.. if i could go back i would be buying a 12 bolt or a 9in as my first upgrade.
Sent from my DROID Pro using Tapatalk 2
-
07-24-2012, 10:49 PM #23
InActive Member
- Status
- Offline
- Join Date
- Mar 2011
- Posts
- 97
Don't forget the 91 and 92 Firehawks got a ZF6 Trans from SLP! So technically it's been in an f-body. Good luck finding one though.
Oh and I remembered one other 93 LT1 specific item. 93s had 22lb injectors and 94+ had 24lb injectors.
-
07-25-2012, 12:08 AM #24
Xtreme Member
- Status
- Offline
- Join Date
- Oct 2008
- Location
- las vegas
- Posts
- 1,721
The 91-92 Firehawks did receive the ZF 6speed however the transmission tunnel was modified extensively to fit the bulky ZF and it had a custom center console to fit properly and it had a custom tranny crossmember fabricated.
http://www.highperformancepontiac.co...k/viewall.html
-
07-25-2012, 06:53 AM #25Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
-
07-25-2012, 08:26 PM #26
InActive Member
- Status
- Offline
- Join Date
- Jul 2012
- Location
- Kingsport,Tn
- Posts
- 20
Thanks for all the info guys. I looked on my codes and mine has the M29, sounds like the better of the two. I have a buddy with a set of Accell Injectors for Tuned Port Camaro that I can get cheap, will these work? He also has the Throttle Body to go with them, but I am pretty sure it isn't compatible with an LT1.
-
07-25-2012, 08:59 PM #271994 Camaro Z-28 M6
LE 242/248 cam,Crower split ratio rockers,AI 23*Trick Flow heads,JetHot longtube headers,Borla exaust,ewp,pro5.0,hybrid TNT wet kit.
-
07-25-2012, 10:18 PM #28
InActive Member
- Status
- Offline
- Join Date
- Mar 2011
- Posts
- 97
Yeah I wouldn't use those injectors myself and technically the TPI throttle body will bolt up and function on a 93 LT1. The IAC valve on a 93 is the same as a TPI but the TPS sensor is different.but all that would require is the TPI sensor and plug then just match the wires. But that's just a waste so just get a 93 LT1 TB.
Bookmarks