- Navigation
Results 1 to 4 of 4
Thread: Stock water pump no HVAC
-
04-27-2012, 04:27 PM #1
Lurker
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Jacksonville, FL
- Posts
- 568
Stock water pump no HVAC
What did you guys do with the coolant ports on the waterpump when you got rid of your HVAC?
1994 Camaro Z-28 M6
LE 242/248 cam,Crower split ratio rockers,AI 23*Trick Flow heads,JetHot longtube headers,Borla exaust,ewp,pro5.0,hybrid TNT wet kit.
-
04-27-2012, 04:42 PM #2
InActive Member
- Status
- Offline
- Join Date
- Nov 2010
- Location
- SoFla
- Posts
- 1,098
A couple fiends have removed the steel pipe parts, then had the pump TIG welded up. Another had his drilled and tapped for a pipe plug. For me I just slapped on a 5/8" bypass cap. I plan to hook my heater up again eventually. FWIW the bypass caps don't last long. They will dry rot and start leaking in a few thousand miles. I have yet to find a good long lasting set.
95 Impala SS Clone
-
04-27-2012, 08:49 PM #3
10 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Josh
- Vehicle
- 96 Z28
- Location
- Holden, MO (KC)
- Posts
- 2,867
I had the pressed inserts removed and the holes tig welded.
-Josh
co-owner of BDBRacing.com
NMCA OC 9004
96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!
-
04-29-2012, 06:00 PM #4
Lurker
- Status
- Offline
- Join Date
- Dec 2011
- Vehicle
- 1994 Firebird Formula. Manual.
- Location
- Too close to the cities, MN
- Posts
- 261
This is how I plugged my oil cooler delete, just posted this on the other site then saw this thread. I just went to oreillys and got the freeze plug for under a dollar. Popped the nozzle out and slapped this plug in. Took a few minutes and works like a charm.
Reply With Quote
Bookmarks