- Navigation
Results 1 to 3 of 3
Thread: Solid roller vid
-
02-22-2012, 08:53 PM #1
under the radar
- Status
- Offline
- Join Date
- Mar 2009
- Posts
- 620
Solid roller vid
I'd like to see a video of a solid roller on a 105.5 lsa if anybody has one. The new motor i picked up has a cam with this lsa and i'd like to know what it might sound like ahead of time.
97 WS6 Trans Am 355 h/c/i and bolt-ons. 11.9829 @111.66 with a 1.6092 60ft mokan. 11.94 @112.26 1.603 60ft Kcir best 60ft 1.567 383 on it's way.
08' 12.49 and faster bracket champ 09' bracket and 12.00 index champ.
-
02-23-2012, 07:00 AM #2
10 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Posts
- 2,586
Mine is a solid roller on a 105. Here is an in-car video that you can kinda hear. Crank the volume! If you have a subwoofer on your computer you'll get a good idea of how loud each "pop" is. It is idling from the :20 mark and sounds pretty good.
http://www.youtube.com/watch?v=WAoR_DxZffU'94 coupe, 10.15 at 133.65 414" LT1, 4500 stall, n/a, pump gas, mufflers, street trim
'15 Z/28, Red Hot, AC, Autocross beast
-
02-23-2012, 12:28 PM #3
under the radar
- Status
- Offline
- Join Date
- Mar 2009
- Posts
- 620
Thanks Joelster. A lot of people try to keep all parts of their cam specs that they forget, telling one spec out of the dozen on a single camshaft isn't going to give away any secrets.
Reply With Quote
Bookmarks