Need some more parts!!!!

**DopdBrd** · 07-21-2011, 12:14 PM

Ok I am going to go into great detail to describe what I want because the last two times I have bought something the seller says they are the right things and they end up being wrong.

I need a torque arm mounting bracket for a T56 in a LT1. If not the whole bracket I just need the long nut and bolt that goes through the transmission bracket at the front, then the bolt that closes the clam mount and screws into the transmission at the top of the Torque arm bracket.

Also I need some steering wheel controls for a 96 or newer TA/Firebird. These are the smaller triangle ones.

**MeanTA** · 07-21-2011, 03:41 PM

Will the bracket from an A4 work? Or atleast the bolts from it?

**DopdBrd** · 07-26-2011, 02:02 PM

I do not believe so. I have a bracket already that I got from someone and the bolts are too long and the bracket is different.

**MeanTA** · 07-26-2011, 07:10 PM

Well I'm hoping to get a torq arm relocation crossmember for my formula. In a week or so. Ill PM you if your still needing one.

**Louvit** · 07-27-2011, 06:41 PM

may be a dunb question, cant you get some arp bolts online or at the dealer?

**95ImpySS** · 07-27-2011, 08:07 PM

I can also take measurements of the ones on my buddies 95 M6 Camaro sometime this week. You could always go to a local hardware store and get grade 8 bolts.

**DopdBrd** · 07-30-2011, 12:12 PM

Originally Posted by MeanTA

Well I'm hoping to get a torq arm relocation crossmember for my formula. In a week or so. Ill PM you if your still needing one.

Awesome man just let me know.

Originally Posted by Louvit

may be a dunb question, cant you get some arp bolts online or at the dealer?

ARP no, I haven't found any. I checked the local two stealerships and neither one had any idea what I was talking about. I even showed them on their computer what I needed but the parts were not available.

Originally Posted by 95ImpySS

I can also take measurements of the ones on my buddies 95 M6 Camaro sometime this week. You could always go to a local hardware store and get grade 8 bolts.

I thought about getting some grade 8 stuff but the bolts are too think to fit through the bracket and the transmission. I've tried 3 different hardware stores and nothing so far.