4l60e to t56 swap

[Greenhornet]

Well my sunshell broke last week , So it was time for some work. Since this section doesn't get much action, I figured I'd post this here. Sorry about the picture quality as I only have my phone. I've been working on it a little bit after work at night. Its not complete but I've got a few days off to work on it now.

Interior Out



Driver inner fender removed . Need space to work on the firewall.


Hole cut for Clutch master.


Mcleod Master bolted in.

Weather sealed.




More to come as I complete more over the next week.

[94Blackbird]

Can't tell if you did or not, but I'd make sure you reinforced the firewall around where the master cylinder is mounted. I've seen a couple conversions where the firewall flexed like a mofo (because the car wasn't designed with a manual option) until they got some reinforcement in there.
good luck with the swap man, I'm trying to talk another friend of mine into doing this to his impala!

[Greenhornet]

Can't tell if you did or not, but I'd make sure you reinforced the firewall around where the master cylinder is mounted. !

There's a kit called the F2b kit. It is a block of aluminum that mounts to the backside of the booster under the dash and bolts to the cowl support brace also. The f-body pedals and master all bolt to this block. The firewall doesn't really get any more stress.

I need to update this thread as i have a lot more done. I have a thread posted over on ISSF. http://www.impalassforum.com/vBullet...d.php?t=261283

[Greenhornet]

Well I replied to you about the firewall but I guess the mod's around didn't approve it. WTF is up with that anyways? ok but this post went right through!

[HilpalaSS]

Sup Green hornet!


Keep this thread alive bro!