- Navigation
Results 1 to 10 of 21
Thread: Impy dies again
Threaded View
-
03-20-2017, 08:30 AM #18Lurker
- Status
- Offline
- Join Date
- May 2013
- Name
- 6 speed Impy
- Vehicle
- 1991 Z-28, 355, HSR, M6--2005 CTS-V (SOLD)--1994 Impala SS 6 Speed Swap--Have all blocks covered.
- Location
- Dover De
- Posts
- 245
Well picked up the car Saturday, new in tank pump harness, new pump, and the hot wire harness relay properly grounded to chassis, but still not sure why it fried the in tank harness, and did not blow the fuse for the hot wire harness at the alt. But it seems to run fine, maybe even a little better, and starts much easier, the check ball in the old pump was dead, would bleed pressure off in a matter on minutes.
Till next time, and I drove it to work today and ran good.
Mike
-
The Following User Says Thank You to 6 speed impy For This Post:
Bookmarks