Twin 6766 kit

[slow94formula]

Posting this for a friend.

PM me for contact information if interested

93-97 Fbody LT1 turbo kit.

This was a setup I custom built on a 97 Camaro that the customer did not have the funds to finish. It was to be a 1000whp+ setup with the alternator and power steeringpump moved down low for an ultra sano engine compartment. It is not complete but the hard part is done. Needs cold side tubing/couplers, and downpipes finished. Also wastegates not included.

Includes:
-304 stainless 1 5/8" custom headers, 1/2" flange, 2.5" to the turbos. Tig welded and backpurged.
-(2) Precision 6766's with .81ar vband inlet turbines. (NEW, $2400 value)
-3" downpipe 90 degree downpipe starters. Expensive PT flanges on turbos and dp's.
-Setup for JGS 40 gates, not included.
-Griffin single pass standup style radiator. Has side mounts. Drill four holes in the radiatorsupport and your done for mounting.
-Treadstone 9" tall vertical core TT intercooler. Has aluminum ducting welded on to direct airflow from the LT1 bumper coverand mounts to the frame ends where the bumper used to bolt.
-Alternator relocation bracket.
-Speedway Motors type 2 power steering setup. New pump, brackets, pulleys, resevoir, etc to low mount on drivers side.