New injectors now I have a high RPM miss

[jaysz2893]

so i was lean, now i have a miss?? I installed new 26# Accel Injectors and Adj FPR. Set the FPR to 43.5 w witth the vac off. I installed my Solomon tune (told him about tthe injector change) and now at high RPM's I have a miss. Like a popping out the pipes. The Tunerpro R/T Log is telling me ERROR on Injector bank 1&2 and Injector Driver 1&2. It does this with either Solomon's tune or my PCMforless one. I just put on a MSD opti 1.5 years ago and i just did new wires, plugs, o2 sensors and a coil. ICM is pretty new too. All i did was install the new injectors and FPR. Datamaster had all kinds of errors, but i have no check engine light nor does the Log on the tunerpro have the same errors. My incar AEM WB A/F gauge is still reading lean too. Any help would be appriciated.