- Navigation
Results 1 to 4 of 4
Thread: torque specs?
-
09-29-2008, 10:52 AM #1
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- kansas
- Posts
- 294
torque specs?
going to do a final shakedown on the motor b4 i start install this weekend. wanting to re-check all the torque specs on the main caps, head bolts, and just about anything else i can. if someone has a good site let me know. i have looked at a few but couldnt find the torque down specs.
Last edited by Milk Man; 09-29-2008 at 10:55 AM.
DD: 01 RCLB Duramax 500hp/1000tq
Project 95Z: cam, nitrous, stuff...
-
09-29-2008, 01:01 PM #2
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Posts
- 57
cylinder head tq is 65 ft.lbs.
-
09-29-2008, 01:57 PM #3
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- kansas
- Posts
- 294
ya i saw that i really need to know the main caps and rod ends.
DD: 01 RCLB Duramax 500hp/1000tq
Project 95Z: cam, nitrous, stuff...
-
09-29-2008, 02:13 PM #4
Post Whore Moderator
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Westchestertonfieldville, IA
- Posts
- 3,960
Main bearing cap bolts
Except inboard bolts 68 ft/lb
inboard bolts (4bolt) 78 ft/lb
Connecting rod cap nut 47 ft/lb
This is off my program at work for a stock motor. Please dont blame me if you motor fails
~Shane
94 Z M6 304hp/336tq
12.61 @ 109.7
Reply With Quote
Bookmarks