- Navigation
Results 1 to 4 of 4
-
07-24-2009, 10:39 AM #1
Banned
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Big Papi
- Vehicle
- 2015 Fusion Titanium AWD
- Location
- Moscow Mills Mo
- Posts
- 7,241
- Blog Entries
- 1
Can someone look over my parts list for Td?
Hey Guys/Gals
Looking to switch to a Td setup And was wondering if you can take a look at these parts and tell me if I am on the right track. I havent seen any other parts list as to what people actually used.
Reducers from headers
http://www.summitracing.com/parts/FLO-R3025/
Xpipe Kit
http://www.summitracing.com/parts/SU...5/?image=large
Bend to ensure the Driver Side is lined up right
http://www.summitracing.com/parts/SUM-621008/
Mufflers
http://www.summitracing.com/parts/WLK-24236/
Hangers for the rear
http://www.summitracing.com/parts/SUM-630550/Last edited by Chris; 07-24-2009 at 01:01 PM.
-
07-24-2009, 11:08 AM #2
Banned
- Status
- Offline
- Join Date
- Sep 2008
- Location
- 11706
- Posts
- 1,865
looks correct?
-
07-24-2009, 11:26 AM #3
SPRAYED LT1!
- Status
- Offline
- Join Date
- Sep 2008
- Location
- york county, va
- Posts
- 1,092
only thing i would add are some turn downs..
http://www.summitracing.com/parts/WLK-41809/Last edited by grn95t/a; 07-24-2009 at 11:29 AM.
Chris Close
-
07-24-2009, 12:29 PM #4
Banned
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Big Papi
- Vehicle
- 2015 Fusion Titanium AWD
- Location
- Moscow Mills Mo
- Posts
- 7,241
- Blog Entries
- 1
Yea Turndowns at autozone are cheaper than summit.
Now its been almost all summer since I have driven my car but do the lt1 headers come right back. I cant recall. And I am basing this exhust off ls1tech and the driver side header comes out at an angle do my hooker headers come straight back. I wouldnt need that extra bend then
Reply With Quote
Bookmarks