- Navigation
Results 1 to 3 of 3
Thread: Oil Pan Bolts
-
06-25-2009, 04:15 PM #1
Pr0jekt Turb0?
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,614
Oil Pan Bolts
I can't find an oil pan bolt kit on summit specifically for the LT1... found some for a Gen1 SBC and LS1s
So are the bolts the same as the Gen1?
-
06-26-2009, 07:32 AM #2
10 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Josh
- Vehicle
- 96 Z28
- Location
- Holden, MO (KC)
- Posts
- 2,867
Here's what I used:http://www.summitracing.com/parts/MOR-38550/
The 4 corner bolts weren't long enough so I had to reuse the stock ones.-Josh
co-owner of BDBRacing.com
NMCA OC 9004
96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!
-
06-26-2009, 04:08 PM #3
Pr0jekt Turb0?
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,614
Alright, so a standard SBC is the correct pitch and everything though, that's all I needed, I think I'm gonna get a good set of studded ones.
Thanks
I appreciate it
Reply With Quote
Bookmarks