- Navigation
Results 1 to 2 of 2
Thread: Stall converter Install soon
-
04-17-2009, 11:58 AM #1
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Eden Prairie, MN
- Posts
- 308
Stall converter Install soon
Got a few questions....
ok so I understand how to remove the transmission... no prob....
but I was wondering if anyone had any info on installing a tranny cooler....
and if you guys thought I should remove the check ball capsule, supposedly yields faster lockup?
would replacing the flexplate while im in there be a smart move?
-
04-17-2009, 05:04 PM #2
InActive Member
- Status
- Offline
- Join Date
- Sep 2008
- Location
- Central IL
- Posts
- 207
Check this write-up out, installation of a cooler on the 4L60E. Brent Franker has a great how-to on his site also. http://www.zmydust.com/trannycooler.html http://www.bfranker.badz28.com/94Z/trannycooler.htm
It definitely wouldn't hurt replacing the flexplate, yours may be prone to cracking soon if it's stock. IIRC a TCI unit is <$100.
Reply With Quote
Bookmarks