- Navigation
Results 1 to 4 of 4
Thread: Hypertech Programmer...?
-
08-30-2021, 01:44 PM #1
Lurker
- Status
- Offline
- Join Date
- Dec 2016
- Name
- Rob
- Vehicle
- 1996 Z28
- Location
- Chicago, IL
- Posts
- 14
Hypertech Programmer...?
Any chance anybody has a Hypertech tuner that's not vin locked that they can bring to the shootout that'll work with my 1996 LT1 fbody?.... My pcm is tuned for a different wheel and gear setup. I have 2 pcm's... 1 is for the gears and a stock non bolt on car the other is for a bolt on car with 273 gears and 27" tire. I'm currently on a 28. I made some street passes and with the 273 pcm on wot pull its holding 3rd gear way too long. I can pay if needed. If I can't find a way to change this I believe running the pcm that has the correct gear setup would be my best option. (Also my sig shows 3.90 gear as that's what the PO told me, it's possible they are 3.73... I will triple check tomorrow on that) Thanks for any help or advice
Rob.
1996 Z-28 LT1 3.90s, longtubes, cai, ory exhaust dumped at axle, Solomon tuned, rebuilt trans, IG:JUNK_LT1
-
08-30-2021, 01:46 PM #2
Lurker
- Status
- Offline
- Join Date
- Dec 2016
- Name
- Rob
- Vehicle
- 1996 Z28
- Location
- Chicago, IL
- Posts
- 14
**A4** 4L60E
Rob.
1996 Z-28 LT1 3.90s, longtubes, cai, ory exhaust dumped at axle, Solomon tuned, rebuilt trans, IG:JUNK_LT1
-
08-31-2021, 08:23 PM #3
10 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Josh
- Vehicle
- 96 Z28
- Location
- Holden, MO (KC)
- Posts
- 2,867
Hopefully somebody will have something to help you out. Moe Bailey and Steve Deliver (sp?) could probably take care of it for you but I don't think they're gonna make this one. Not positive on that but I haven't heard confirmation on either one.
-Josh
co-owner of BDBRacing.com
NMCA OC 9004
96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!
-
09-01-2021, 10:21 AM #4
Lurker
- Status
- Offline
- Join Date
- Dec 2016
- Name
- Rob
- Vehicle
- 1996 Z28
- Location
- Chicago, IL
- Posts
- 14
Either way I'll be there. I'd like to run the car but even if I can't I'm excited to see yall's cars so it'll be worth it.
Rob.
1996 Z-28 LT1 3.90s, longtubes, cai, ory exhaust dumped at axle, Solomon tuned, rebuilt trans, IG:JUNK_LT1
Reply With Quote
Bookmarks