- Navigation
Results 1 to 4 of 4
Thread: Where to dyno in MN
-
05-04-2021, 11:19 PM #1
LTX Member
- Status
- Offline
- Join Date
- Nov 2015
- Name
- Dan
- Vehicle
- 1996 Camaro Z28
- Posts
- 19
Where to dyno in MN
I've got a 96 z28, so OBDII plus LT1. Does anyone have any recommendations of someone to dyno the car in the twin cities MN area? Nothing too special, just a heads and cam car. I've been running around on stock injectors for years now and they've been fine although the duty cycle was high as I recall from a street tune many moons ago. Now I've got at least one sticking open so I'm going to put some 30#ers in there. Plus, I'm a little curious about numbers. Thanks for any help.
-Dan
-
05-05-2021, 08:35 PM #2
LTX Member
- Status
- Offline
- Join Date
- Jul 2020
- Name
- Jim
- Vehicle
- 1996 Roadmaster wagon
- Location
- Minnesota
- Posts
- 19
You can try TPI specialties in Shakopee, they claim a lot of knowledge about that vintage. https://tpis.com/
-
05-06-2021, 03:20 AM #3
LTX Regular
- Status
- Offline
- Join Date
- Sep 2011
- Vehicle
- 95 ta
- Location
- little falls mn
- Posts
- 117
I used TPIS twice for mine I was pretty happy with them. Jim was always really professional and he gave us a tour of the place and answered any questions I had too. I have since started tuning myself otherwise I’d still use them.
Adam Legatt 95 trans am, 355 LE ported 21* TFS heads SS4000, 9'' 11.18@ 121.5 mph
-
05-06-2021, 05:18 PM #4
LTX Member
- Status
- Offline
- Join Date
- Nov 2015
- Name
- Dan
- Vehicle
- 1996 Camaro Z28
- Posts
- 19
OK, I'll call them. I'll post the numbers when it's done... as long as they aren't too embarrassing. Haha
Reply With Quote
Bookmarks