- Navigation
Results 11 to 13 of 13
Thread: HELP ME !!! i need piston rings
-
08-10-2015, 06:46 PM #11
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Plasma moly and nitrous are a no no especially on that large of a shot. Buddies motor had the coating flake off after a while.
-
08-10-2015, 06:59 PM #12
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
FOUND THEM >>>>> YAY <<<<<< i found the rings i need to get ... after spending about 6 hours calling around to EVERYONE who makes rings .... total seal asked me evey question i could think of and some i couldnt ... but they said this is the rings for me
http://www.summitracing.com/parts/tsr-csh47015
Chromium nitride top ring facing material on a steel ringLast edited by zooguy; 08-10-2015 at 07:12 PM.
94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
08-10-2015, 07:13 PM #13
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
Chromium nitride top ring facing material on a steel ring94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
Reply With Quote
Bookmarks