- Navigation
Results 1 to 4 of 4
-
06-07-2015, 10:10 AM #1
Lurker
- Status
- Offline
- Join Date
- Jul 2009
- Location
- jacksonville, florida
- Posts
- 416
Trick flow 195 heads and edlebrock lt4 intake
I have a set of trick flow 195 heads with 7/16 rocker studs and guide plates and edlebrock lt4 intake. Heads and intake have about 30k on them engine developed a bottom end knock and will not be used on the rebuild I am going with a bigger set and changing the setup.
1500 shipped
uploadfromtaptalk1433689511010.jpguploadfromtaptalk1433689432298.jpguploadfromtaptalk1433689444048.jpg[ATTACH]33222[/ATTACHLast edited by tleed; 06-17-2015 at 01:11 PM.
forged 383,9.6:1,280xfi, trickflow heads,edlebrock lt4 intake,moser 12 bolt w/373
-
06-17-2015, 01:11 PM #2
Lurker
- Status
- Offline
- Join Date
- Jul 2009
- Location
- jacksonville, florida
- Posts
- 416
Bump
forged 383,9.6:1,280xfi, trickflow heads,edlebrock lt4 intake,moser 12 bolt w/373
-
06-26-2015, 11:18 AM #3
Lurker
- Status
- Offline
- Join Date
- Jul 2009
- Location
- jacksonville, florida
- Posts
- 416
Best reasonable offer
forged 383,9.6:1,280xfi, trickflow heads,edlebrock lt4 intake,moser 12 bolt w/373
-
06-28-2015, 10:25 AM #4
Lurker
- Status
- Offline
- Join Date
- Jul 2009
- Location
- jacksonville, florida
- Posts
- 416
Sold
forged 383,9.6:1,280xfi, trickflow heads,edlebrock lt4 intake,moser 12 bolt w/373
Reply With Quote
Bookmarks