- Navigation
Results 1 to 7 of 7
Thread: Fuel line replacement
-
03-20-2015, 01:52 PM #1
InActive Member
- Status
- Offline
- Join Date
- Sep 2011
- Posts
- 166
Fuel line replacement
I need to replace the plastic fuel lines. I know where it connects under the door area. If this a push on type connector and do they make an adapter to change it to 6an? Part number and site would be great. Thanks for the help.
97 Mystic Teal Camaro, Forged 396 Single plane EFI 24x N20, Finishline 4L60E, S60, M/T Drag Radial
-
03-20-2015, 02:52 PM #2
LTX Regular
- Status
- Offline
- Join Date
- Jul 2013
- Name
- Ernie
- Vehicle
- 97 Mullet
- Location
- Minot
- Posts
- 302
www.fastbirdperf.com/93-97f-body/FuelLineRelocation.htm
If you email fastbird he might be able to make something.Last edited by sleepy_z; 03-20-2015 at 02:58 PM.
-
03-20-2015, 04:06 PM #3
Lurker
- Status
- Offline
- Join Date
- Mar 2009
- Location
- Spring, TX
- Posts
- 950
IIRC, Russell makes them. I got them with my Speed Inc fuel line relocation kit.
IMG_2206.jpg1997 Pontiac Trans Am WS6 clone | Build Thread | - just needs paint!
2001 Chevy Silverado 2500HD (the DD)
-
03-20-2015, 04:17 PM #4
InActive Member
- Status
- Offline
- Join Date
- Sep 2011
- Posts
- 166
I know which fitting I need now to connect where plastic started. Russell makes it. How long does line need to be roughly. 6'?
97 Mystic Teal Camaro, Forged 396 Single plane EFI 24x N20, Finishline 4L60E, S60, M/T Drag Radial
-
03-20-2015, 07:31 PM #5
Lurker
- Status
- Offline
- Join Date
- Mar 2009
- Location
- Spring, TX
- Posts
- 950
6' sounds about right. One thing I had to do was lightly sand the stock hard lines so the fittings would slip on, so just something to keep in mind.
1997 Pontiac Trans Am WS6 clone | Build Thread | - just needs paint!
2001 Chevy Silverado 2500HD (the DD)
-
03-20-2015, 07:38 PM #6
Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
Six feet of line is what I use in my relocation kits and it's about spot on. Russel and a couple other companies make the fittings you're looking for, just be prepared to spend about $100 for four of them in order to facilitate the -an conversion. They're not cheap.
Originally Posted by Ryan Stout
-
03-20-2015, 08:53 PM #7
InActive Member
- Status
- Offline
- Join Date
- Sep 2011
- Posts
- 166
Do you make them? I have seen black braided line I would not mind using. Fittings I have found look to be about $17 per.
97 Mystic Teal Camaro, Forged 396 Single plane EFI 24x N20, Finishline 4L60E, S60, M/T Drag Radial
Reply With Quote
Bookmarks