Become a ltxtech.com member, Click here to register!

Results 1 to 4 of 4
  1. #1
    InActive Member


    Status
    Offline
    Join Date
    Sep 2013
    Vehicle
    1994 Camaro z28
    Location
    College Station
    Posts
    95

    Default Am I missing anything?

    Ok guys my z28 is strictly a straight line "street/strip" car. This is my current chassis set up.

    BMR- adjustable torque arm, lca with brackets, sfc, safety loop, crossmember, panhard bar.
    Lakewood- 90/10 struts
    Eibach- drag launch springs with air bag in the rear.
    Calvert- single adjustable rear shocks
    Rear end- S60 with Detroit locker and 3:55 rear gear.
    PA racing- chromoly K-member
    Inland- 3" steel driveshaft
    Possibly unit drag bar????? Y'all's thoughts on that piece?
    Also the car is getting a new motor. 396ci LT1 making 580hp. Will also be seeing the bottle too around 200hp shot.

  2. #2
    VIP Member


    Status
    Offline
    Join Date
    Apr 2011
    Name
    KYLE
    Vehicle
    95 MQBM Z28
    Location
    davison michigan
    Posts
    3,874

    Default

    Yes you're going to want a drag bar. Going to help alot

  3. #3
    "The Hammer"


    Status
    Offline
    Join Date
    Nov 2009
    Name
    JimmyMo
    Vehicle
    1994 Trans Am
    Location
    In your kitchen, stealing your snacks...
    Posts
    2,531

    Default

    you're also going to want a set of adjustable shocks. Especially if you plan on hitting it with the bottle.
    "Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"

  4. #4
    InActive Member


    Status
    Offline
    Join Date
    Sep 2013
    Vehicle
    1994 Camaro z28
    Location
    College Station
    Posts
    95

    Default

    Alright thanks guys

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •