- Navigation
Results 1 to 3 of 3
Thread: LC1 usb cable?
-
08-09-2013, 05:10 PM #1
Lurker
- Status
- Offline
- Join Date
- Nov 2008
- Location
- Methuen Mass
- Posts
- 652
LC1 usb cable?
I'm trying to log my LC1 to my laptop for logging vs rpm. The cable it came with is the 3.5mm to female serial analog cable and the serial port on my laptop is also female. So I either need a male/male adapter to use this cable, or here's my question:
Is there a 3.5mm to usb cable, or since its analog is there a serial to usb adapter box to plug this cable into then a usb to laptop cable?
95 Z28 hard top - LT1, 4L60e, bolt ons, Yank SS3600, suspension, viking coil overs, 3.42 10 bolt, 3320 lbs - 12.304 @ 108.52mph 1.69 60'
08 Saab 9-7x - L96 6.0 swap, L92 heads/intake/TB, LS6 cam, LS9 springs, 7.425" hardened pushrods, CAI, 1-3/4" stepped LT's, catback, 4L60E, FTI 3000 278mm converter
-
08-11-2013, 01:32 PM #2
LTX Regular
- Status
- Offline
- Join Date
- Aug 2013
- Name
- Gary
- Vehicle
- 1998 Trans Am
- Location
- Florida
- Posts
- 241
It is unusual for a serial connector on a pc to be female (without pins). Are you sure you are looking at the right connector, not one for the display maybe?
Here is a discussion about the USB adapters. They are a bit tricky to get working correctly. I would recommend ones with the FTDI chip. not the Prolific one.
http://www.d-series.org/forums/engin...apter-lc1.html
-
08-11-2013, 06:10 PM #3
Lurker
- Status
- Offline
- Join Date
- Nov 2008
- Location
- Methuen Mass
- Posts
- 652
Yeah its pretty odd indeed, but yup its a female serial port... Thanks for the link I'm researching that now.
Last edited by KLaBZ28; 08-11-2013 at 06:14 PM.
95 Z28 hard top - LT1, 4L60e, bolt ons, Yank SS3600, suspension, viking coil overs, 3.42 10 bolt, 3320 lbs - 12.304 @ 108.52mph 1.69 60'
08 Saab 9-7x - L96 6.0 swap, L92 heads/intake/TB, LS6 cam, LS9 springs, 7.425" hardened pushrods, CAI, 1-3/4" stepped LT's, catback, 4L60E, FTI 3000 278mm converter
Reply With Quote
Bookmarks