- Navigation
Results 1 to 2 of 2
-
06-23-2012, 12:54 PM #1
MAD ABOUT LTX's
- Status
- Offline
- Join Date
- Jun 2012
- Name
- Mike
- Vehicle
- 1993 Camaro Z/28 A4 2006 Chevrolet Avalanche 1500 1970 Firebird Espirit, 1972 Camaro Sport Coupe
- Location
- Vallejo Ca (SF Bay Area)
- Posts
- 1,609
Detailed measurments, mechanical drawings of the 9 inch for F-bodys needed please.
I would like to build a 9 inch for my car but will need detailed measurements of the housing ect to do it, does anybody know or have mechanical drawings ect to do this?
I have seen many cars out there with the 9 inch in them so I figured somebody has to have what I need, please help and thank you LTX members for being awesome.If you don't stand behind our MIlitary then feel free to stand in front of them.<---- This is my oldest son (PROUD DAD HERE) Mike (just plain mad) Madman337 1993 Camaro Z/28 A4 all stock other than a muffler and LCAs @292K+ miles. 2006 Chevrolet Avalanche. 1970 Pontiac Firebird. 1972 Camaro, 1994 Corvette, 17 Fusion Sport AWD V6 Twin Turbo
-
06-27-2012, 11:47 PM #2
MAD ABOUT LTX's
- Status
- Offline
- Join Date
- Jun 2012
- Name
- Mike
- Vehicle
- 1993 Camaro Z/28 A4 2006 Chevrolet Avalanche 1500 1970 Firebird Espirit, 1972 Camaro Sport Coupe
- Location
- Vallejo Ca (SF Bay Area)
- Posts
- 1,609
OK here is the update, I have a freind who has been racing stock eliminator race cars since 1971 and he said will set me up with a dana 60 for my Camaro.
My question is "Has anybody put in a 60 that was narrower than stock with good results and if so how much more narrow"?
My friend has the jig to narrow the housing ect so then all I have to get are the axles.If you don't stand behind our MIlitary then feel free to stand in front of them.
Reply With Quote
Bookmarks