- Navigation
Results 1 to 5 of 5
Thread: a4 3.73 tuning
-
09-25-2011, 08:38 PM #1
InActive Member
- Status
- Offline
- Join Date
- Jul 2011
- Location
- Anna,IL
- Posts
- 411
a4 3.73 tuning
What do I need change the vales to, shift points, speedo, I use tunerpro, thanks
Dustin Dillow-Tuned by Dillow's Tuning Solutions
95 Firebird Formula Cam, Bolt Ons, QP 9 Inch 3.50 Gear, Full UMI Rear Suspension, 3700lbs
7.86 at 86.20 mph 1.67 60ft, 7.16 at 99 mph 1.51 60 ft on .063 jet NX Shark Nozzle Single Fogger
-
09-26-2011, 08:46 AM #2
InActive Member
- Status
- Offline
- Join Date
- Jul 2011
- Location
- Anna,IL
- Posts
- 411
Anyone?
Dustin Dillow-Tuned by Dillow's Tuning Solutions
95 Firebird Formula Cam, Bolt Ons, QP 9 Inch 3.50 Gear, Full UMI Rear Suspension, 3700lbs
7.86 at 86.20 mph 1.67 60ft, 7.16 at 99 mph 1.51 60 ft on .063 jet NX Shark Nozzle Single Fogger
-
09-26-2011, 04:09 PM #3
InActive Member
- Status
- Offline
- Join Date
- Nov 2010
- Location
- SoFla
- Posts
- 1,098
I cannot comment on which tables are in tuner pro. All my experience is with C.A.T.S. You will need to adjust for the new gears. Which involves in-putting different values. Tire size, rear gear ratio, etc. C.A.T.S has a nifty tab that does the conversion for you. If you like I can input your specs and send you the numbers it spits out. You will have to change your up and down shift points to lower MPH's. You will also have to adjust the kick down tables in order for the car to shift properly. IIRC they will also be lower MPH values. Basically you'll have to feel it out and adjust the shift points to where you like them best. As the car sits now it should hit the rev limiter before every WOT shift.
95 Impala SS Clone
-
09-27-2011, 05:05 PM #4
InActive Member
- Status
- Offline
- Join Date
- Jul 2011
- Location
- Anna,IL
- Posts
- 411
Can someone send me a bin with the 3.73 already tuned in
Dustin Dillow-Tuned by Dillow's Tuning Solutions
95 Firebird Formula Cam, Bolt Ons, QP 9 Inch 3.50 Gear, Full UMI Rear Suspension, 3700lbs
7.86 at 86.20 mph 1.67 60ft, 7.16 at 99 mph 1.51 60 ft on .063 jet NX Shark Nozzle Single Fogger
-
09-29-2011, 12:59 PM #5
InActive Member
- Status
- Offline
- Join Date
- Nov 2010
- Location
- SoFla
- Posts
- 1,098
PM me with your email.
95 Impala SS Clone
Reply With Quote
Bookmarks