- Navigation
Results 1 to 4 of 4
Thread: Clutch locked up
-
09-19-2011, 06:31 AM #1
InActive Member
- Status
- Offline
- Join Date
- Jan 2011
- Vehicle
- 1995 Camaro Z28
- Location
- Concord, NC
- Posts
- 185
Clutch locked up
I was cruising down the interstate and the car shut off when I pushed in the clutch. I tried to start it back and the clutch tried to engage but juat chugged the engine. After the second time, the clutch locked up and the pedal will not go down. Any ideas???
Chris
1995 Camaro Z28 M6
Tuned by PCMForLess, Tick Shift T56 rebuild, Zeus Performance
-
09-24-2011, 03:48 PM #2
InActive Member
- Status
- Offline
- Join Date
- Sep 2011
- Posts
- 3
Pull your slave cylinder out and see if the rod is bent. If it isn't, make sure the ball end of it is mating with the groove in the clutch fork.
-
09-26-2011, 04:25 PM #3
InActive Member
- Status
- Offline
- Join Date
- Nov 2010
- Location
- SoFla
- Posts
- 1,098
I would do what sc.schultz says. Sounds like a pressure plate or throw out bearing failure.
Originally Posted by sc.schultz
95 Impala SS Clone
-
09-27-2011, 07:43 AM #4
InActive Member
- Status
- Offline
- Join Date
- Jan 2011
- Vehicle
- 1995 Camaro Z28
- Location
- Concord, NC
- Posts
- 185
Finally got it apart and turned out to be the throwout bearing. Thanks yall :-)
Chris
1995 Camaro Z28 M6
Tuned by PCMForLess, Tick Shift T56 rebuild, Zeus Performance
Reply With Quote
Bookmarks