- Navigation
Results 1 to 2 of 2
-
04-02-2011, 08:07 PM #1
"The Hammer"
- Status
- Offline
- Join Date
- Nov 2009
- Name
- JimmyMo
- Vehicle
- 1994 Trans Am
- Location
- In your kitchen, stealing your snacks...
- Posts
- 2,531
DA error after initial connection
Alright, here's my issue. I finally got the car and my computer talking, but it will only connect for something like 5 to 10 seconds, and then I'll get a red DA error. The cigarette lighter fuse is good, and I have all the programs and stuff and followed gregrob's walk through on tuner pro to the T. Anyone know why I would get a DA error after it initially flashes blue and says connected?
"Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"
-
04-05-2011, 06:18 PM #2
"The Hammer"
- Status
- Offline
- Join Date
- Nov 2009
- Name
- JimmyMo
- Vehicle
- 1994 Trans Am
- Location
- In your kitchen, stealing your snacks...
- Posts
- 2,531
Ok, so I went and messed around with it a little today, and it flashes like cherries and berries. A little progress, but still stumped as to what could be causing this?
"Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"
Reply With Quote
Bookmarks