QUICK PLEASE!!! HARNESS REMOVAL DRIVER SIDE FIREWALL WONT COME LOOSE!!!!!

[quickkris2006]

im at the part of my teardown that i need to get the dash harness out of the car to install in my other car.. i already have it all disconnected and labeled and i just cant get it out of the driver side fire wall. and i cant get my hand down there in the engine bay because of the damage to the car.. are there any bolts like in the 3rd gen c100 connection or does it just slip out and disconnect or do i have to pull it into the car with the headlight harness??? please help im going over to the car soon to work on it and this is really one of the last things i need so that i can start getting my interior back in and together.

[quickkris2006]

anyone??

[Blubird]

Are you trying to remove the interior or engine ?

[quickkris2006]

interior.. the engine and trans is already out of the car and they clip in on the passenger side i need to get the headlight harness and interior dash harness out..

[Blubird]

The headlight harness should be connected to the engine harness.and if the engine harness is out there should be nothing holding the interior harness in with.how is it stuck ?

[quickkris2006]

no the headlight harness is not connected to the engine harness.. its connected to the interior harness.. there is a rectangle plastic clip that is under the driver side part where the dash was behind the brake pedal.. cant get it out and really need it out n dont wanna break it

[quickkris2006]

got the harness out.. had to do a lil firewall enlarging but i got it out.. gatta love my bfh and prybar..