AI cam and the GMMG is installed!

[INTrooper4255]

Here's a short idle clip.



It's AI's 226/234 565/566 cam on a 110 LSA. Below are the rest of the mods. It made 300 RWHP and 314 TQ with bolt on's and no tune. I'll get it to the dyno sometime and see what it does now.

Black 1996 Z-28, 6spd with Pro 5.0 and Lou's Short Stick and MBA knob, K&N cold air, Holley 58MM TB, Granatelli Mass Air Flow sensor with polished ends. Crane valve springs, Trick Flow hardened push rods w/guide plates, Comp Pro Magnum roller rockers Cloyes double roller timing chain. Hooker ceramic coated long tubes with 3" Hooker Y pipe, GMMG Cat back with Powerstick chambered bullet in intermediate Pipe. MSD 6A, MSD coil, MSD plug wires, NGK TR55 plugs. March underdrive pulleys. Auto meter electric Fuel pressure gauge in pod and Scanmaster. Granatelli 255lph in tank pump. Aeromotive adjustable fuel pressure regulator. 6AN braided fuel lines rerouted from factory location. DMS drop springs, BMR control arms, adj. panhard rod. Spohn weld-on lower control arm relocating brackets. Enkei Win wheels with 275/40/17's in front and 315/35/17's in back. Polished aluminum radiator cover, polished aluminum valve covers, polished aluminum Vortech elbow, chrome alternator, ceramic coated intake with ported runners and TB openings to 58MM, ceramic coated water pump housing with Mezeire Electric water pump, ceramic coated accessories bracket. Mad Z28 tune.