- Navigation
Results 11 to 12 of 12
Thread: Pulling motor
-
07-21-2010, 03:53 PM #11-Joe-
95 T/A.
Advanced Induction 383 - 10.81 @ 124.16, 1.43 60' Video of 10-second pass - 455whp/445wtq
-
07-21-2010, 05:38 PM #12
If you have a cherry picker to pull it out the top, you can drop it out the bottom with the cherry picker. If trying to come out the top, something which may cause a fly in your ointment is if you don't have a long enough cherry picker arm, the jack from the cherry picker will butt up against the nose of your car possibly causing damage. I had this problem when I tried to come out the top of my parts car. I did the swap in my 94 out the bottom and will not do it any other way on these cars again. JMHO.
94 Z28 LT1 M6 - SOLD
Bookmarks