- Navigation
Results 1 to 4 of 4
Thread: Crank Trigger
-
11-17-2017, 06:55 AM #1
Lurker
- Status
- Offline
- Join Date
- Oct 2013
- Location
- Evansville, IN
- Posts
- 143
Crank Trigger
Is it possible to use a crank trigger with the OPTI behind the balancer??.... I need to take a closer look to see if I can mount the wheel to my ATI balancer, but I'm more concerned with being able to mount the sensor.
does anyone have any pics to share??
thank you!!
Tim96 Vert 383 forged AFR 210 LT4 Intake CP Pistons T400 Moser 9" Borg Warner S480
-
11-17-2017, 08:43 AM #2
Lurker
- Status
- Offline
- Join Date
- Sep 2008
- Vehicle
- 1996 Z28
- Location
- Newark, DE
- Posts
- 106
I am not sure of your crank pulley setup but I am using a crank trigger mounted to the front of the balancer which would not affect the opti position at all.
-
11-17-2017, 11:20 AM #3
Lurker
- Status
- Offline
- Join Date
- Oct 2013
- Location
- Evansville, IN
- Posts
- 143
Thank for the pic!!.... I'm running an ATI serpentine belt balancer so the front of my balancer is clean... looks like I can do what you did.
96 Vert 383 forged AFR 210 LT4 Intake CP Pistons T400 Moser 9" Borg Warner S480
-
11-17-2017, 11:37 AM #4
Lurker
- Status
- Offline
- Join Date
- Sep 2008
- Vehicle
- 1996 Z28
- Location
- Newark, DE
- Posts
- 106
You might need to run small spacers for the sensor mount to clear the opti plug wires but it will work.
Reply With Quote
Bookmarks