- Navigation
Results 1 to 2 of 2
Thread: Help troubleshooting LTCC
-
03-30-2015, 04:37 PM #1
Lurker
- Status
- Offline
- Join Date
- Sep 2014
- Name
- mike
- Vehicle
- 1997 Z/28 M6
- Location
- OHIO
- Posts
- 88
Help troubleshooting LTCC
Sent a email to Bob waiting on a response. Anyone have any experience trouble shooting one of these? I am getting a red led code 4 I have the 2 pink wires hooked to the factory pink and the 2 white going to the factory white (1997car) double checked all connectors and sure I have good grounds. Did not ground each individual coil but they ring out to the engine. Any ideas?
97 Z/28 58,000 miles.. M6, C5 ZO6 wheels and brakes, UMI LCA, PHB & TA, LPP headers, Custom 3.5 exhaust with Magnaflow muffler, LE2 heads, Intake 227/235 cam, 58mm TB, 36lbs. injectors, Pro Magnum 1.6, Meziere water pump, Crown Vic 8.8 w/4.10 gears
-
03-30-2015, 08:09 PM #2
Lurker
- Status
- Offline
- Join Date
- Sep 2014
- Name
- mike
- Vehicle
- 1997 Z/28 M6
- Location
- OHIO
- Posts
- 88
Jumped the gun on asking for help. Bob emailed me back within 10 min. and I should of only had 1 of the 2 white wires connected to my harness. One of white wires has a black mark and is not to be used. I now have spark
97 Z/28 58,000 miles.. M6, C5 ZO6 wheels and brakes, UMI LCA, PHB & TA, LPP headers, Custom 3.5 exhaust with Magnaflow muffler, LE2 heads, Intake 227/235 cam, 58mm TB, 36lbs. injectors, Pro Magnum 1.6, Meziere water pump, Crown Vic 8.8 w/4.10 gears
Reply With Quote
Bookmarks