- Navigation
Results 1 to 9 of 9
-
06-22-2013, 10:56 AM #1
Overworked/Underpaid
- Status
- Offline
- Join Date
- Aug 2012
- Name
- Peter Alpiger
- Vehicle
- 1996 Trans Am WS6; 1994 Corvette [GS Clone]
- Location
- Carrollton, Texas
- Posts
- 4,324
94 Corvette Tranny seals question
Hey guys, got the vette up in the air ready to replace the leaking transmission seals and realized the exhaust is completely blocking the driveshaft and the tranny except for the pan... I'm praying one of you know some secret trick to getting the driveshaft out without having to remove the whole exhaust system, since it looks like it's all one piece from the manifolds on back...
Please help, guys!
96 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...
-
06-22-2013, 12:47 PM #2
Overworked/Underpaid
- Status
- Offline
- Join Date
- Aug 2012
- Name
- Peter Alpiger
- Vehicle
- 1996 Trans Am WS6; 1994 Corvette [GS Clone]
- Location
- Carrollton, Texas
- Posts
- 4,324
Nevermind guys, ended up dropping it all anyway.
Sent from my SGH-i777 using Xparent Red Tapatalk 296 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...
-
06-22-2013, 12:55 PM #3
Overworked/Underpaid
- Status
- Offline
- Join Date
- Aug 2012
- Name
- Peter Alpiger
- Vehicle
- 1996 Trans Am WS6; 1994 Corvette [GS Clone]
- Location
- Carrollton, Texas
- Posts
- 4,324
Sent from my SGH-i777 using Xparent Red Tapatalk 2
96 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...
-
06-22-2013, 04:48 PM #4
Overworked/Underpaid
- Status
- Offline
- Join Date
- Aug 2012
- Name
- Peter Alpiger
- Vehicle
- 1996 Trans Am WS6; 1994 Corvette [GS Clone]
- Location
- Carrollton, Texas
- Posts
- 4,324
Mods, feel free to delete this, I don't really see anything here worth learning from.
96 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...
-
06-22-2013, 05:17 PM #5
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Does the exhaust have to be removed in order to get the driveshaft out?
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
06-22-2013, 06:01 PM #6
Overworked/Underpaid
- Status
- Offline
- Join Date
- Aug 2012
- Name
- Peter Alpiger
- Vehicle
- 1996 Trans Am WS6; 1994 Corvette [GS Clone]
- Location
- Carrollton, Texas
- Posts
- 4,324
Yep, no way around it unfortunately, it blocks everything from the transmission tail on back to and including the rear end. Luckily it was a lot easier than I feared haha.
Originally Posted by firebird_1995
Sent from my SGH-i777 using Xparent Red Tapatalk 296 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...
-
06-22-2013, 06:46 PM #7
Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
An unfortunate downside to Vette's........anything driveline related results in exhaust coming down.
-
The Following 2 Users Say Thank You to Fastbird For This Post:
-
06-22-2013, 08:13 PM #8
LTXTech Sponsor
- Status
- Offline
- Join Date
- Jan 2013
- Name
- Gail C. Cahall
- Vehicle
- 93 Camaro, 95 Impala SS, 01 Corvette, '05 Dodge Ram
- Location
- Newark, Delaware
- Posts
- 619
Did all the seals work out OK?
Frank
-
The Following User Says Thank You to CPT For This Post:
-
06-22-2013, 09:00 PM #9
Overworked/Underpaid
- Status
- Offline
- Join Date
- Aug 2012
- Name
- Peter Alpiger
- Vehicle
- 1996 Trans Am WS6; 1994 Corvette [GS Clone]
- Location
- Carrollton, Texas
- Posts
- 4,324
Yep, worked out great! Thank you again! Originally Posted by Cahall
Sent from my SGH-i777 using Xparent Red Tapatalk 296 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...
Reply With Quote
Bookmarks